Job Details

ID #1984714
State Oklahoma
City Tulsa
Full-time
Salary USD TBD TBD
Source Oklahoma
Showed 2019-03-22
Date 2019-03-18
Deadline 2019-05-17
Category Skilled trades/artisan
Create resume

Skilled/technical: Now Hiring: Apply Today (tulsa)

Oklahoma, Tulsa 00000 Tulsa USA

Vacancy expired!

WELDING:

MIG STRUCTURAL WELDERS: Must be able to set up welding machine., run clean bead T-joint sheetmetal on stainless steel 2" downhill, 2" uphill 6" of weld, visual test. $13-$14+ North Tulsa, lots of overtime.

Code/Fitter Welder: Must have 5 years experience. Ability to pass ASME Code Section 8 welding test, Tig, in 6 g position and Fluxcore, have excellent written and verbal communication skills, ability to sue and read lever, tapes, protractors, and various tools, read and interpret blueprints and have strong math skills. $26-$28 SAND SPRINGS

Exp. Fluxcore Welder for Glenpool Fabrication shop $13-$14

Exp. Fitter for Glenpool Fabrication shop $13-$14

Exp. Hard Wire Mig Welder/Spray Arc: Production type environment a plus. Fitter experience a plus. Operate and interpret reading from basic measurement equipment. West Tulsa $14-$16 Hr. 1st shift.

Pipe or Structural Fitters: 3 + years experience. able to layout their own matierials, use a cutting torch and read blueprints. $17-$19 Catoosa

Pipe Welders: 3 + Solidwire and Fluxcore, Subarc and Tig Welding, all automatic on a pinwheel, 6g test all on pipe. $20+ Company builds vessels, skids, platforms and heaters. Catoosa

Structural Welders: 3 yrs experience Fluxcore on carbon steel. $17 - $19+ 1st shift. Will be given a plate test. Uphill, downhill with fluxcore. Code Shop 3g. Fluxcore on plate uphill and downhill. Company builds vessels,skids, platforms and heaters. Catoosa

Mig Structural Welders: 2 Years Experience Must be able to set up machine, run a clean bead, T-joint sheetmetal on stainless steel . 2" downhill, and 2: uphill, 6" of weld visual test. $13-$14 Hr.

Pipe and or Structural Fitters: 3 years experience. Able to layout their own materials, use a cutting torch, and read blueprints. 1st shift $17-$19 hr. Catoosa

Fitter Welder I: Ability to pass Mig and Fluxcore test, ability to read and use level, tape measure, protractors, and various tools, read and interpret blue prints to have strong math skills. $22-$24

Fitter/Welder II: Must have 5 years experience. Ability to pass Tig, Mig, Fluxcore test, ability to read and use levels, tapes, protractors, and various tools, read and interpret blue prints and have strong math skills. $24-$26

Structural Welders: Fluxcore and Mig processes, fast paced shop fabrication shop.

ASME Code Welders: Able to pass ASME code-compliant welding test including 3g Fluxcore and Pulse Mig. $18-$20

Structural Steel Fitters, Able to read blueprints, layout materials, fit-up and have good math skills. $16+DOE

3-5 Yr. Exp. Fitter only ( no welding) $20+ hr. West Tulsa

Fluxcore Welders: 2 +years experience. ability to pass a 3g/4g fluxcore, fill in cap X-Ray test, 1/2 inch plate structural welding. $17-$19

SKILLED:

2nd shift Experienced Hem Saw Operator $14 North Tulsa. Read tape measure.

TEST MOLDER: $13+ HR.

1ST SHIFT: 5:00AM-5:30PM $13+ Hr.

2ND SHIFT 5:00PM-5:00AM $13+ hr. with $1.00 Night Differential.

POSITION SUMMARY:

Test molds to ensure proper operation and to establish production procedures to maximize production, minimize waste and ensure quality parts are produced. Collect materials/parts and walk through test process. Fill out test forms.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Checks new, revised and reworked tooling for proper and safe operation.

Through trial and error, fine tunesĀ the production specifications for producing the parts when given weight, press tonnage, etc.

Writes production procedures.

Assists production molders with productivity and troubleshooting issues.

Prepares stock for use in test molding; make preforms, sandblast and paint.

Completes daily labor tickets.

OTHER DUTIES AND RESPONSIBILITIES:

Attention to detail and accuracy

Good critical thinking skills

QUALIFICATION REQUIREMENTS:

Minimum 1 years molding experience

High School diploma or equivalent

Good verbal and written communication skills

Basic mathematical skills

Must be able to follow written instructions

Knowledge of weights and measures conversions

Familiar with hand tools such as snips, knives, scissors, etc.

Reading comprehension skills

Lift 50lbs.

Benefits: Health, Dental, Vision: 401K, Vacation and sick pay, Tuition Reimbursement. Promotions within.

Must Pass 10 Panel drug screen, Background Check looking back 7 years. Cannot have allergies, company works with fiberglass.

MANUFACTURING LEAD PERSON: $18.63 Hr.

1st shift 5:00am-5:00pm $18.63+ Hr.

2nd shift 5:00pm-5:00am with $1.00 Night Shift Differential

Prepares and operates molding press to process/produce a high quality product. Ensures production continuity of press lines. Troubleshoots equipment and processes as need arises. Assists operators with documentation and processes. Ensures molding records reflect accuracy of the days production. Fills in for Molding Supervisor.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Sets up press-checking tonnage, cure time, temperature, speed control etc.

Retrieves preforms/extrusions/inserts for job as needed.

Makes sure paperwork is filled out correctly.

Approves time in Mercury (Kronos).

Has an understanding of the molding processes at all skill levels.

Understands how to operate press according to job specifications.

Insures MIPs are being followed.

Inspects parts for flaws.

Helps troubleshoot molding of rejected parts.

Records time and work on labor ticket each day.

Checks production records for job completion and upcoming assignments.

Communicates with support departments as necessitated by production needs.

Assigns presses as necessary.

Assists employees as needed.

Communicates all production/press related information to next shift lead or shift Supervisor.

Understands LEAN concepts, such as: TAKT, time, capacity measures, etc.

OTHER DUTIES AND RESPONSIBILITIES:

Fills in for supervisor when needed

Assists with mold installation as needed

Assists with material handling between departments as needed

Facilitates the training of press operators at all levels

Moves molding materials from the staging area to the pressline

Able to relieve and fill-in during lunch breaks and operate press

QUALIFICATION REQUIREMENTS:

Minimum of one year related experience

General experience in a production environment filling a supervisory role

Ability to multi-task

Problem solving/decision making skills

Ability to prioritize

Attention to detail and accuracy

Conversion of weights and measures

Comprehension of written and verbal communication skills

Problem solving skills

Basic mathematical skills (addition/subtraction, multiplication/division)

Lift 50 lbs.

Benefits: Health, Dental, Vision: 401K, Vacation and sick pay, Tuition Reimbursement. Promotions within.

Must Pass 10 Panel drug screen, Background Check looking back 7 years. Cannot have allergies, company works with fiberglass.

MAINTENANCE II TECHNICIAN $20+

1ST SHIFT: 5:00AM-5:00PM

2ND SHIFT: 5:00PM-5:00AM with $1.00 Night Shift Differential

POSITION SUMMARY:

To maintain or repair equipment and facilities including mechanical, electrical, and hydraulic machinery to keep production running. Perform preventative maintenance. Assist Level III Maintenance when needed.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Diagnose basic problems of inoperative equipment or faulty conditions.

Repair or recommend repair of equipment with faulty properties.

Read basic blueprints and equipment manuals.

Do metal fabrication.

Perform preventative maintenance as required.

Perform other duties as assigned by supervisor.

OTHER DUTIES AND RESPONSIBILITEIS:

Problem solving/decision making skills

Ability to Prioritize

Ability to work independently or in a team environment

Attention to detail and accuracy

QUALIFICATION REQUIREMENTS:

Two (2) years general maintenance experience. Extensive experience preferred.

Basic verbal and written communication skills required

Understanding of basic shop mathematics to prepare/analyze figures

Understanding of basic processes of mechanics, hydraulics, pneumatics, construction, remodel, fabrication and electrical theory

Provide standard hand tools used in performance of job function

Be capable of building repair and maintenance including basic electrical service

Be capable of repair and maintenance of production equipment

Experience with forklifts, welders, various hand tools, meters, plasma, torch and grinders

PHYSICAL REQUIREMENTS:

Heavy physical effort such as lifting, bending, carrying, etc. may be required

Prolonged standing/walking/bending/twisting, crouching, crawling, balancing and squatting

Pushing/Pulling forces up to/over 40 pounds

Occasional sitting/keyboard work

Repetitive motion of finger, wrist, elbow, shoulder or neck movement

Occasional forceful hand grasp

Use of fingertips for pinching or retrieving small objects

Occasional awkward postures of neck, shoulder, wrist, elbow or fingers

Work in confined spaces or close quarters

Use of vibrating tools

Hearing

Speaking clearly

Lifting or carrying up to 100 pounds

Lifting from floor to waist/waist to shoulder/shoulder to overhead

Reaching above/below shoulder level occasionally while holding objects

Climbing ladders/scaffolds/step stools/ramps/stairs/unguarded heights

Seeing to visually inspect, measure/assemble at close distance

Able to distinguish colors

Frequent use of motor vehicles, forklifts, power tools, slicing/cutting equipment, machinery and machinery that produces excessive heat.

Lift. 100 lbs.

Benefits: Health, Dental, Vision: 401K, Vacation and sick pay, Tuition Reimbursement. Promotions within.

Must Pass 10 Panel drug screen, Background Check looking back 7 years. Cannot have allergies, company works with fiberglass.

CNC PROGRAMMER 5 YEARS EXPERIENCE $24.33+ Hr.

1st shift 5:00am-5:00pm

2nd shift 5:00pm-5:00am with $1.00 Night Differential

POSITION SUMMARY:

Programs and sets-up CNC Lathes and Milling Machines. Able to generate code and programs for CNC machines.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Able to use solid models or drawings to create code for machines.

Programs and sets up CNC machines to manufacture parts per drawings or instructions.

Coordinates 1st article inspections on all parts.

Performs time studies to find most efficient method of producing products.

Ensures correct tooling for the job is being utilized.

Assists Supervisor in overseeing production operations and scheduling.

Helps advance skills of lower level CNC machinists.

Assigns work to others and becomes responsible for that work.

Meets all production quotas.

Spends time on the floor. Operates machines as needed.

OTHER DUTIES AND RESPONSIBILITIES:

Interfaces with Engineering as required

Utilizes Cam programming software

Visualizes and studies blueprints

Utilizes critical thinking skills

QUALIFICATION REQUIREMENTS:

Bachelors degree or formal training/certification in programming and operating CNC machines

Minimum 5 years of experience in programming and operating CNC machines

Experience with micrometers, calipers and other precision tools

Intermediate computer skills (Cam software, SolidWorks, AutoCad, MS Word, Excel, PowerPoint)

Mathematical skills including geometry and trigonometry

Verbal and written communication skills

Ability to prioritize and handle multiple tasks

Ability to follow detailed and complex instructions

Ability to problem solve/decision making

Manual machining a plus but not required

PHYSICAL REQUIREMENTS

Frequent bending, standing, walking, kneeling, reaching and climbing

Keyboard work

Hearing and speaking clearly

Lifting/carrying objects up to 50 lbs.

Lifting from floor to waist

Reaching from shoulder level or below/over shoulder/shoulder to overhead

Seeing to distinguish colors, prepare/analyze figures, prepare/review documents, to visually inspect items and to measure/assemble at a close distance

QUALIFICATION REQUIREMENTS:

Bachelors degree or formal training/certification in programming and operating CNC machines

Minimum 5 years of experience in programming and operating CNC machines

Experience with micrometers, calipers and other precision tools

Intermediate computer skills (Cam software, SolidWorks, AutoCad, MS Word, Excel, PowerPoint)

Mathematical skills including geometry and trigonometry

Verbal and written communication skills

Ability to prioritize and handle multiple tasks

Ability to follow detailed and complex instructions

Ability to problem solve/decision making

Manual machining a plus but not required

Lift 50lbs

Benefits: Health, Dental, Vision: 401K, Vacation and sick pay, Tuition Reimbursement. Promotions within.

Must Pass 10 Panel drug screen, Background Check looking back 7 years. Cannot have allergies, company works with fiberglass.

Millwright 5 YEARS EXPERIENCE $25+ HR.

1ST SHIFT: 5:00AM-5:00PM

2ND SHIFT: 5:00PM-5:00AM WITH $1.00 NIGHT SHIFT DIFFERENTIAL

POSITION SUMMARY:

Installs, Fabricates, and repairs Hydraulic, Electrical, and Pneumatic Machines.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Maintaining Hydraulic Presses to insure they are safe and functioning correctly.

Troubleshooting Electrical, Hydraulic issues while coming up with a corrective action or repair.

Steel fabrication using a welder, Mill, and Lathe as needed.

Be able to work independently or in a team environment while following instructions.

Completes all necessary paperwork related to job.

Follow all LOTO and safety Policies.

OTHER DUTIES AND RESPONSIBILITIES:

Assists all Maintenance personnel when needed

Maintains a clean and safe work area

Operating a forklift, boom lift, and crane as needed

Proper rigging of all machinery or parts as needed.

QUALIFICATION REQUIREMENTS:

A minimum of 5 years experience as a high-level maintenance technician with a manufacturing company.

The ability to read and interpret electrical and hydraulic schematics.

PLC knowledge on a trouble shooting level preferred

Must be proficient in repairing hydraulic and electrical issues.

Good verbal and written communicational skills.

Familiar with three phase 480-volt electrical circuits.

Benefits: Health, Dental, Vision: 401K, Vacation and sick pay, Tuition Reimbursement. Promotions within.

Must Pass 10 Panel drug screen, Background Check looking back 7 years. Cannot have allergies, company works with fiberglass.Assembly Technician: Ability to read P&ID drawings and blueprints. Instrumentation fittings, cut and thread piping, read tape measure, knowledge of pipe fitting, valves and switches. operate forklift and crane $20-$22. Sand Springs

Material Handler/Shipping/Receiving, will use 3 different forklift sizes. Must safely unload plates, beams and other structural steel to stage for jobs and keep material fed to the saw and plasma table areas. Check materials in against paperwork to ensure that right material was received. Must be able to process the paperwork for shipping/receiving. $14-$16 1st shift West Tulsa

Exp. Hard Wire Mig Welder/Spray Arc: Production type environment a plus. Fitter experience a plus. Operate and interpret reading from basic measurement equipment. West Tulsa $14-$16 Hr. 1st shift.

Exp. Heavy Hose Sandblaster: operates specialized tools and machinery that fire high powered jets of sand or other abrasive at metal and other similar hard surfaces to remove paint, grime, old adhesives, rust and other imperfections from material to be painted or refinished. Mask off specific areas of object to protect from abrading actions. Starts equipment that directs blast or flow to surfaces of metal. Manually directs nozzle over surface of metal to ensure conformance to specs. $14-$15 East Tulsa

Experienced Carpenter: must read tape measure, read blueprints, have tool belt with all carpenters tools, handle power tools , know different types of lumber and plywood. Will work with foam, corrigated plastic and braces. must be able to cut curves. Have valid drivers license to drive to different locations. 1st shift. $11.50

Experienced Carpenter for overlay of garage doors, have own tools, read tape measure $15

Valve Technicians. Candidates who have mechanical aptitude and the willingness to learn, basic manual machine exp., perform PSV testing utilizing certified test equipment, read and interpret schematics for assembly, repair and reassembly. Inspection, reporting, cleaning and reassembly of valves. $12-$14 Broken Arrow

Electrical and Mechanical Facility Maintenance Tech Tulsa manufacture, wiring, read schematics for single and three phase motors, repair electrical switches and motors. Repair all facility machines and equipment, service and repair compressors, basic wiring. Mig/Tig welding skills. $16-$17

Experienced Hem Saw/Band saw operator at North Tulsa steel company $14 hr. 1st shift. FELONY FRIENDLY. CALL 918-742-5300.

Civil Engineer: 5+ years experience. Must be licensed, will be inspecting structural buildings, Must be able to climb ladders, stoop, bend, kneel and work long hours: 60K

Exp. Material Handler: Move big steel shapes, loads and unloads product moving throughout the plant, reads work orders and follows instructions for materials to be moved onto trucks, trays, racks, shelving by forklift, read tape measure, using hand tools to open containers using steel cutters, crowbar, clawhammer. Strapping and , bracing, or padding to prevent damage in in transit. Knowledge of steel shapes. 1st shift overtime required as needed. $16-$19 Sand Springs.

CDL A Flatbed Driver 3 years exp., must be able to drive truck pulling a 40 foot goose neck trailer, load and unload of crates and other building materials is a must. Strap down, tie down, flag on back of trailers. $14

Industrial Painters/Heavy Hose Sandblasters: 2 Yrs experience must be able to paint and blast, will be doing both, able to mix and shoot conventional and airless using a pot. Knowledge of all different types of paints. $14-$17

MACHINING:

CNC Lathe 2nd shift Leadman $20-$25 hr. will be a working leadman running machines, and running crew, problem solver, troubleshoot, give directions to employees.

CNC Lathe Operator 2nd shift, Setups and edits. 3:30pm-Midnight shift.

CNC Mill and Lathes Machinist: 3 years of experience required. Must have ability to program machines along with running machines with Fanuc controls and g-codes, must have own tools. $18-$20

CNC Quickmills Intimidator 120, also if you have fanuc controls exp. or have ran a Mori-Seiki, Haas, Okuma or Mazak experience you will qualify. 2nd shift DOE

CNC Programmer will also run machines. Esprit software and G-codes $20+ DOE

CNC/Manual Machinist: 2 years experienced Manual & CNC experience. Have own tools. Exp with manual mills, lathes and CNC equipment is required. Puma Lathes and Haas mills. Basic computer skills. $18+

Apply in person at:

Labor Resource Pros

3117 S. Jamestown Ave.

Tulsa, OK 74135

Bring drivers license and social security card to apply from 9:00am-3pm Monday-Friday

TO APPLY ONLINE, CLICK THIS LINK: https://20181214161626mw47d1g3cqpx5xdn.applytojob.com/apply/dITWd2DxGB/Lloyd-Richards-Personnel-Application?source=Craigslist

Vacancy expired!

Subscribe Report job