Maintenance Controls Technician

Job Description

The Maintenance Controls Technician position is responsible for performing highly diversified duties to install, troubleshoot, repair and maintain production and facility equipment according to safety, predictive and productive maintenance systems and processes to support the achievement of the site’s business goals and objectives. As a first shift role the regular hours for this position are

· Knowledge of PLC and Robotic controls. Allen Bradley, PanelView, and Fanuc robotics preferred.

· Installs new equipment/machinery as required.

· Diagnoses problems with existing equipment/machinery. Performs both mechanical and electric repairs on all equipment/machinery using blueprints, schematics, diagrams, etc.

· Performs all welding, fabrication, electrical repairs, including installation and service of single phase and 480 volt – 3-phase electric

· Maintains and repairs all plant and office facilities in an efficient and safe manner.

· Responsible for reporting raw material and parts usage for the department; reports all new parts requests.

· Follows all Company safety procedures, safe work and good housekeeping practices.

· Participates in and supports the Company’s Continuous Improvement programs

· Other duties may be assigned.

• At least four (4) years experience in an industrial environment or equivalent combination of education or training beyond high school level in a technical field.

Qualifications

• Knowledge of basic computer and smart phone technology; work order systems desired
• Demonstrated leadership skills, including strong interpersonal and motivational skills.
• Must be able to work independently with minimal supervision.
• Must be able to read, write and understand English.
• Must provide own basic tools; refer to Basic Tool Policy below.

The inability to perform any of the following physical requirements does not preclude an applicant from consideration unless, following an individualized analysis, it is determined that the physical requirement is an essential job function and the applicant is unable to perform such function with or without reasonable accommodation. Please refer to the Essential Duties and Responsibilities.

• Good physical condition which requires: prolonged standing; frequent repetitive lifting up to 55 lbs.; frequent lifting and bending motions, and carrying up to 55 lbs.; frequent repetitive motions such as bending, twisting, lifting, walking, reaching, stooping, frequent use of stairs; must be able to climb ladders and use lift trucks. Able to work at heights up to 50 feet.
• Must pass pre-employment physical and drug/alcohol test; Must pass respirator fit test and able to wear respirator. Must pass tow motor training and acquire certification for tow motor operation; and must pass HazMat training.

Maintenance employees are required to provide their own set of Basic Tools as identified below. Other tools required by an employee to perform their job will be provided for by the Company. The Company will make the final determination as to the necessity and purchase of Company-provided tools.

Maintenance employees will receive a tool allowance in January of each calendar year. This tool allowance is provided to cover wear and tear, replacement costs and insurance on Basic Tools as required by the Company. Basic Tools are the personal property of the employee and not insured by the Company.

¼ inch Drive Sockets:

3/8 Inch Drive Standard

17 Combination Wrenches

9 12-Point Sockets

Sockets:

Standard:

3/16 “, 7/32”, ¼” 9/32”,

8 6-Point Metric Sockets:

5/16”, 5/8”, 11/32”, 3/8”,

5/16”, 11/32”, 3/8”, 7/16”,

9mm, 10mm, 11mm,12mm,

7/16”, ½”, 9/16”, 15/16”,

½” and

13mm, 14mm, 15mm, 17mm;

1”, 1-1/16”, 11/16”, ¼”,

3 Torq Bit Sockets:

7 12-Point Flex Sockets:

¾”, 13/16”, 7/8”, 1-1/8”,

T-15, T-20, T-25

3/8:, 7/16”, ½”, 9/16”, 5/8”,

and 1-1/4”

¼ Inch Drive Tools:

11/16”, ¾”;

15 Combination Wrenches

Q.R. Ratchet

9 6-Point Deep Sockets:

Metric:

1-1/2” Extension Bar

7/16”, ½”, 3/8”, ¾”, 13/16”,

6mm, 7mm, 8mm, 9mm,

3/8 Inch Drive Tools:

9/16”, 5/8”, 11/16”, 7/8”;

10mm, 11mm, 12mm,

Q.R. Ratchet

2 Spark Plug Sockets:

13mm, 14mm, 15mm,

3” Extension Bar

5/8”, 13/16”;

16mm, 17mm, 21mm,

6” Extension Bar

4 Torq Bits:

23mm, and 25mm

½ Inch Drive Tools:

T-30, T-40, T-45, T-50;

Miscellaneous Tools:

Q.R. Flex Ratchet

2 Screwdriver Bits:

Vinyl Wrench Roll Up,

15” Flex Handle

#2 Phillips, 039 Slotted; and

Vinyl S.D. Roll Up,

6” Extension Bar

1 Socket Adaptor:

Protective Goggles,

5 Screwdrivers:

3/8”F – ½”M

Hacksaw, 6” Flex Rule,

#0 Phillips, #2 Phillips,

½ Inch Drive Sockets:

Scriber, Screw Starter,

3/6” x 4” Slotted

13 – 12-Point Standard

26 Bd. Leaf Offset Gauge,

¼” x 6” Slotted

Sockets: 7/16”, ½”, 9/16”,

68d. Wire Feeler Gauge,

1/8” x 3” Slotted

5/8”, 11/16”, ¾”, 13/16”,

26-3/4” Pick-Up Tool,

3 Hammers:

7/8”, 15/16”, 1”, 1-1/16”,

Hi/Low Voltage Tester,

12 oz. Plastic Tip

1-1/18”, 1/1/4”, and

1/8” Pin Punch,

12 oz. Ball Pein

Socket Adaptor:

¾” x 7” Cold Chisel,

32 oz. Ball Pein

½”F – 3/8M

Rolling Wedge Bar,

8 Pliers:

10 Combination Wrenches

¼” x 12” Line-Up Tool,

7” Diag. Cut, 6” Long Nose,

Standard Ignition:

Brake Tool, Brake Spring

6-3/4” Slip Joint, 9-1/2”

10 piece set

Tool, Brake Spring Washer

Arc Joint, 7-1/2” Straight

4 Flare-Nut Wrenches:

Tool, Flashlight,

Locking, Snap-Ring, and

3/8” x 7/16”, ½”x9/16”,

1-1/4” Stiff Putty Knife,

Small Truard

5/8”x11/16”, and ¾”x7/8”

Gasket Scraper,

14 Hex Key Wrenches

14 Hex Key Wrenches

¼” Socket Rack,

Metric:

Standard:

3/8” Socket Rack,

14 piece set

14 piece set

½” Socket Rack

ITW is an equal employment employer F/M/Disability/Vet/Sexual Orientation/Gender Identity.

Additional Information

All your information will be kept confidential according to EEO guidelines.